Replace the heating element in the oven. If the oven doesn’t heat up and isn’t turned on to do its job, it could be due to a faulty heating element.
The heating element is the main part of the oven to generate heat if it fails, the oven stops cooking, or cooks food.
So if your cake doesn’t bake or it doesn’t fry, there will be less or no heat in the oven and you will need to check the heating element, if that’s the culprit, or some other component in the oven. damaged unit.
Fortunately, it’s not difficult to open the rear panel and inspect and replace the oven’s heating element if you’re average. So keep reading this article for all the detailed steps to inspect and replace the oven heating element.
Replace heating element in oven
Electric ovens depend on a heating element to generate heat inside the appliance. In most models, two heating elements are installed, one at the top of the unit and the second at the bottom.
If one of them fails for some reason, you can replace it this way. But before you start your work, you must have the necessary tools such as gloves, a screwdriver to open the nut, and a needle stacker.
1. Shut off the power supply
Before repairing the heating element of an oven or any other appliance, be sure to turn off the power. In this case, if you check that the appliance is not generating enough heat, press the stop button and unplug the power cord from the outlet.
2. Let the heating element cool down
You know that there is a lot of heat inside the appliance when you cook food. If you are ready to replace the faulty heater, it is best to wait an hour for the heater to cool down and you can easily touch it.
3. Detach the back panel
In most ovens, a metal cover is fitted to the bottom of the appliance to protect the heating element. Drag it up and detach it from its place.
4. Open the screws of the heating element
Now put on gloves and use a flat-head screwdriver to unscrew one of the damaged heater element screws. You will open the screws on the front and back to separate the heating element from the oven.
After opening the screws, you must put them in place so they don’t get lost; Finally, you have to reattach the new thermostat.
5. Let out the fixed brackets of the element
In some models, additional supports are attached with bolts. Check the process and detach the heater holder fixings.
6. Slowly pull out the element
It’s easy to take the item out because it’s loose, so pull it gently and slowly. You cannot pull the entire item because it is attached to the wire and you must disconnect the wire, also known as the wire set. It is a clamp for fixing the element to the oven.
7. Disconnect the old element
After disconnecting the power cord, the old element can now be easily removed from the oven. Now it’s up to you if you want to throw the old item in the trash or recycle it.
8. Fix the heating element
You’re all set to repair your oven’s new heating element, so follow these steps.
- First, place the new cement in its place so that it is close to the furnace wire. This is essential because if you don’t place it near electrical wires, you won’t be able to connect them tightly.
- Now fix the fixed wire to the element. Align the harness so that the fastening groove is correct. Now put the brackets in their place.
- Finally, fully tighten the screws in their respective positions so that the heating element does not change position when you cook food in the appliance. Place the metal cap in its place.
9. Check the new element
Now it’s time to test your work. Plug the cord into an electrical outlet and press the power button. You can put a cup of water inside the oven and check if the oven is heating the water.
If the water heats up, you have successfully replaced the part, but if the problem persists, you can hire a certified professional to inspect the oven and fix the problem.
How to repair oven heating element replacement
Last Words
The gist of the article is that it is not difficult to change the heating element in the oven if it is faulty.
Related Guides